1 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 1 noise suppression products/emi suppression filters > emifil r (lc combined) > feed through type 2012.11.8 o this data sheet is applied for chip emifil r used for general electronics equipment for your design. emifil r (lc combined) feed through type nfe61p series (2706 size) c dimensions 2.60.3 6.80.5 0.70.2 0.70.2 1.60.3 1.60.3 (1) (2) (3) (in mm) : electrode c insertion loss characteristics (main items) frequency (mhz) insertion loss (db) (50 - 50 ) 0 10 20 30 40 50 60 0.1 1 10 100 2000 1000 nfe61pt361b1h9 nfe61pt681b1h9 nfe61pt102e1h9 nfe61pt472c1h9 nfe61pt330b1h9 nfe61pt680b1h9 nfe61pt101z1h9 nfe61pt181b1h9 c equivalent circuit input (output) output (input) gnd no polarity. (1) (3) (2) c packaging code packaging minimum quantity l 180mm embossed tape 2500 k 330mm embossed tape 8000 b bulk(bag) 500 c rated value ( p : packaging code) part number capacitance rated current rated voltage insulation resistance (min.) operating temperature range nfe61pt330b1h9 p 33pf 30% 2a 50vdc 1000m ohm -40 to +85c nfe61pt680b1h9 p 68pf 30% 2a 50vdc 1000m ohm -40 to +85c nfe61pt101z1h9 p 100pf 30% 2a 50vdc 1000m ohm -40 to +85c nfe61pt181b1h9 p 180pf 30% 2a 50vdc 1000m ohm -40 to +85c nfe61pt361b1h9 p 360pf 20% 2a 50vdc 1000m ohm -40 to +85c nfe61pt681b1h9 p 680pf 30% 2a 50vdc 1000m ohm -40 to +85c nfe61pt102e1h9 p 1000pf 80/-20% 2a 50vdc 1000m ohm -40 to +85c nfe61pt472c1h9 p 4700pf 80/-20% 2a 50vdc 1000m ohm -40 to +85c number of circuit: 1 continued on the following page.
2 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 2 noise suppression products/emi suppression filters > emifil r (lc combined) > feed through type 2012.11.8 o this data sheet is applied for chip emifil r used for general electronics equipment for your design. continued from the preceding page. c ! caution/notice ! caution (rating) do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering pro? le where peak solder temperature is below the tin melting point is used. please con? rm the solderability of tin plating termination chip before use.
|
